phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Rosewood Baker



Think you have a slab leak in your Rosewood Baker home or business? 247 LeakMasters is a family owned and operated slab leak detection and repair business. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Rosewood Baker homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Rosewood Baker

What is a slab leak?

Concrete slabs with copper piping run underneath the foundation are common in Rosewood Baker. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. This leads to what is known as a slab leak. Because the leak source is not visible by the time you actually see the water damage can be extensive. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Hot water lines associated with slab leaks make them easier to find. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Leaks from the cold-water line are much more difficult to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. Identifying the location of the leak in the slab is possible with our specialized device. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Finding the exact location can greatly reduce the time and cost of the repair.


What is slab leak detection & how does it work?


Slab leak detection uses electronic equipment to locate the source of the leak. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The sound is picked up by the detector and used to locate the problem. We avoid digging up the floor to find the issue because the sound travels through the slab. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. All or our plumbers are also licensed and insured contractors who can take on the task. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We are always ready to help! Our plumbing technicians can be at your Rosewood Baker home in 60 minutes any day of the week regardless of what time it is. For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!