phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Bristol Warner



Think you have a slab leak in your Bristol Warner home or business? When it comes to Slab leak detection in Bristol Warner, 247 LeakMasters a local and family owned business is your go to solution. Our plumbing technicians use the latest leak detection equipment to find the source and repair the pipe & any water or flood damage. With years of experience behind us, we expertly repair your leak with minimal invasion.

All of our plumbers are licensed contractors and experts in repairing home damage. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Bristol Warner homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Bristol Warner

What is a slab leak?

Most Bristol Warner homes have copper piping under a concrete slab type foundation. Cracks and holes are known to develop over time in copper piped plumbing. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


It’s fairly easy to find the location of a slab leak from the hot water line. The exact location is easy to find with our leak detector once we find the hotspot on the floor. Cold-water line leaks present a much more challenging issue to locate. Electronic leak detection equipment is required so we can ‘listen’ to buried pipes. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Finding the exact location can greatly reduce the time and cost of the repair.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The problem is located when the detector picks up the sound. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. 247 LeakMasters has 60 minute response times for Bristol Warner around the clock. Our plumbing technicians are ready to help! We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!