phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair University City



Think you have a slab leak in your University City home or business? When it comes to Slab leak detection in University City, 247 LeakMasters a local and family owned business is your go to solution. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. With years of experience behind us, we expertly repair your leak with minimal invasion.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for University City homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in University City

What is a slab leak?

Concrete slabs with copper piping run underneath the foundation are common in University City. Cracks and holes are known to develop over time in copper piped plumbing. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. The exact location is easy to find with our leak detector once we find the hotspot on the floor. Locating a cold water-line leak is very challenging. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. The device will accurately pinpoint the location of the leak within the slab. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


Detecting a slab leak’s exact location requires electronic equipment. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The sound is picked up by the detector and used to locate the problem. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. The entire operation is non-invasive & non-destructive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. All or our plumbers are also licensed and insured contractors who can take on the task. Our friendly technicians are experts at dealing directly with your homeowners insurance to give you peace of mind.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. 247 LeakMasters has 60 minute response times for University City around the clock. Our plumbing technicians are ready to help! We are locally based and family owned slab repair services experts. Call Us Today!