phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Sherman Heights



Slab leaks in Sherman Heights can cause major long term damage to your home. 247 LeakMasters is a family owned and operated slab leak detection and repair business. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We figure out the best way to fix the leak without digging a big hole in your floor.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Sherman Heights homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Sherman Heights

What is a slab leak?

Plumbing in most homes in Sherman Heights utilize copper piping underneath a concrete foundation. Cracks and holes are known to develop over time in copper piped plumbing. This is what we call a slab leak. It is often difficult to find the source of the leak because the pipe is hidden in the slab and water can escape slowly over time. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Finding the general area of a slab leak from the hot water line is straightforward. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. It is difficult to pinpoint the exact location of cold water-line leaks. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. Identifying the location of the leak in the slab is possible with our specialized device. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


Detecting a slab leak’s exact location requires electronic equipment. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The equipment isolates the sound and locks on to the issue location. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. We truly are 24/7. We have 60 minutes response times for Sherman Heights plumbing emergencies. We are ready to help! As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!