phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Roseville



Have you been told you have a slab leak in Roseville? When it comes to Slab leak detection in Roseville, 247 LeakMasters a local and family owned business is your go to solution. Our plumbing technicians use the latest leak detection equipment to find the source and repair the pipe & any water or flood damage. We figure out the best way to fix the leak without digging a big hole in your floor.

All of our plumbers are licensed contractors and experts in repairing home damage. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Roseville homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Roseville

What is a slab leak?

The plumbing systems in many properties in Roseville were installed with copper piping buried in the large concrete foundation. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. Leaks from the cold-water line are much more difficult to locate. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. Our equipment reveals the exact location of the leak in the slab. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


It is important to use electronic equipment to locate the exact source of your slab leak. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The sound is picked up by the detector and used to locate the problem. We avoid digging up the floor to find the issue because the sound travels through the slab. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Many skills are required to successfully find and repair a slab leak; detection, re-piping and water damage restoration. All or our plumbers are also licensed and insured contractors who can take on the task. Don’t worry about dealing with your insurance company. We will help you every step of the way.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. We are always ready to help! Our plumbing technicians can be at your Roseville home in 60 minutes any day of the week regardless of what time it is. We are locally based and family owned slab repair services experts. Call Us Today!