phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Mount Hope



Slab leaks in Mount Hope can cause major long term damage to your home. 247 LeakMasters is a family owned and operated slab leak detection and repair business. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. We figure out the best way to fix the leak without digging a big hole in your floor.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Mount Hope homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Mount Hope

What is a slab leak?

The plumbing systems in many properties in Mount Hope were installed with copper piping buried in the large concrete foundation. It is common for cracks to develop in even the most reliable copper piping over time. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Cold-water line leaks present a much more challenging issue to locate. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. Our equipment reveals the exact location of the leak in the slab. Non-invasive electronic detection equipment means we don't have to damage your home to find the location of the issue. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


Detecting a slab leak’s exact location requires electronic equipment. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The sound is picked up by the detector and used to locate the problem. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. Non-destructive and non-invasive techniques are our specialty.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. We can have a plumbing technician from 247 LeakMasters at your Mount Hope property in 60 minutes or less, 24 hours a day, 7 days a week. We are locally based and family owned slab repair services experts. Call Us Today!