phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Mission Valley



Do you suspect that your Mission Valley home has a slab leak? 247 LeakMasters is a family owned and operated slab leak detection and repair business. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Mission Valley homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Mission Valley

What is a slab leak?

Most Mission Valley homes have copper piping under a concrete slab type foundation. Cracks and holes are known to develop over time in copper piped plumbing. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Finding the general area of a slab leak from the hot water line is straightforward. The exact location is easy to find with our leak detector once we find the hotspot on the floor. Locating a cold water-line leak is very challenging. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. The device will accurately pinpoint the location of the leak within the slab. Finding the location of the issue is done in a non destructive way because we use the latest electronic leak detection equipment. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The equipment isolates the sound and locks on to the issue location. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


It takes a discipline of skills for slab leak detection, repair repiping and water damage restoration. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. We can have a plumbing technician from 247 LeakMasters at your Mission Valley property in 60 minutes or less, 24 hours a day, 7 days a week. For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!