phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Bayside Village



Slab leaks in Bayside Village can cause major long term damage to your home. When it comes to Slab leak detection in Bayside Village, 247 LeakMasters a local and family owned business is your go to solution. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. We figure out the best way to fix the leak without digging a big hole in your floor.

All of our plumbers are licensed contractors and experts in repairing home damage. We are insurance specialists, working directly with your insurance company so you don’t have to.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Bayside Village homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Bayside Village

What is a slab leak?

The plumbing systems in many properties in Bayside Village were installed with copper piping buried in the large concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Hot water lines associated with slab leaks make them easier to find. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. It is difficult to pinpoint the exact location of cold water-line leaks. Listening to a buried pipe is essential and requires special electronic leak detection equipment. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Finding the exact location can greatly reduce the time and cost of the repair.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. Our detector locks on to the sound and pinpoints where the issue is. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Many skills are required to successfully find and repair a slab leak; detection, re-piping and water damage restoration. All or our plumbers are also licensed and insured contractors who can take on the task. Don’t worry about dealing with your insurance company. We will help you every step of the way.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We can have a plumbing technician from 247 LeakMasters at your Bayside Village property in 60 minutes or less, 24 hours a day, 7 days a week. For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!