phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Mission Grove



Have you been told you have a slab leak in Mission Grove? 247 LeakMasters is a family owned and operated slab leak detection and repair business. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are licensed contractors can perform quality repairs to any damage you have. We interface directly with your insurance provider so you can focus on more important things!

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Mission Grove homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Mission Grove

What is a slab leak?

The plumbing systems in many properties in Mission Grove were installed with copper piping buried in the large concrete foundation. Cracks and holes are known to develop over time in copper piped plumbing. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Finding the general area of a slab leak from the hot water line is straightforward. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. Locating a cold water-line leak is very challenging. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. The device will accurately pinpoint the location of the leak within the slab. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. Time and costs are reduced because we identify exactly where the repairs need to be done.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. Our detector locks on to the sound and pinpoints where the issue is. Because the sound travels through the slab, it is not necessary to dig up the floor to search for the problem. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



If you suspect you have slab leak it is important to have a professional diagnose it right away to keep damage and costs down. We can have a plumbing technician from 247 LeakMasters at your Mission Grove property in 60 minutes or less, 24 hours a day, 7 days a week. For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!