phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Riverside County



Do you suspect that your Riverside County home has a slab leak? 247 LeakMasters is a family owned and operated slab leak detection and repair business. We diagnose leaks, fix pipes and clean up any water or flood damage by using the latest electronic leak detection equipment. We figure out the best way to fix the leak without digging a big hole in your floor.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Riverside County homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Riverside County

What is a slab leak?

The plumbing systems in many properties in Riverside County were installed with copper piping buried in the large concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. This leads to what is known as a slab leak. Because the leak source is not visible by the time you actually see the water damage can be extensive. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Finding the general area of a slab leak from the hot water line is straightforward. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Leaks from the cold-water line are much more difficult to locate. Listening to a buried pipe is essential and requires special electronic leak detection equipment. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


Detecting a slab leak’s exact location requires electronic equipment. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. The problem is located when the detector picks up the sound. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. Non-destructive and non-invasive techniques are our specialty.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We can have a plumbing technician from 247 LeakMasters at your Riverside County property in 60 minutes or less, 24 hours a day, 7 days a week. As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!