Slab Leak Repair Belvedere

Do you suspect that your Belvedere home has a slab leak? 247 LeakMasters is a family owned and operated slab leak detection and repair business. Our plumbing technicians use the latest leak detection equipment to find the source and repair the pipe & any water or flood damage. We treat your home like ours and use non-invasive techniques to repair your leak.

No need to call out a separate repairman, our plumbers are licensed contractors and can perform repairs in the same call! We are insurance specialists, working directly with your insurance company so you don’t have to.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Belvedere homes. If you think you may have a slab leak, don’t delay, call us today!

What is a slab leak?

What does a slab leak look like?

If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.

How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor

What causes a slab leak?

While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.

How can I find a slab leak?

Generally it is pretty easy to use the hot water line to find the general area of a slab leak. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. It is difficult to pinpoint the exact location of cold water-line leaks. Because the pipe is buried, we must use an electro-acoustic leak detection device so we can ‘hear’ where the issue is. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. Pinpoint accuracy helps us reduce time and costs for your repair.

What is slab leak detection & how does it work?

It is important to use electronic equipment to locate the exact source of your slab leak. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. The equipment isolates the sound and locks on to the issue location. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. The entire operation is non-invasive & non-destructive.

How do I repair a slab leak?

Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.

Slab Leak Repair Service

The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. All or our plumbers are also licensed and insured contractors who can take on the task. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.

Delays in diagnosing a slab leak can cause more damage drive up repair costs. 247 LeakMasters has 60 minute response times for Belvedere around the clock. Our plumbing technicians are ready to help! For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!