phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Stuart



Have you been told you have a slab leak in Stuart? Local and family owned, 247 LeakMasters is an expert slab leak detection business. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

We are not just plumbers but fully licensed contractors, this allows us to perform any necessary repairs. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Stuart homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Stuart

What is a slab leak?

Plumbing in most homes in Stuart utilize copper piping underneath a concrete foundation. It is common for cracks to develop in even the most reliable copper piping over time. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. To minimize damage to your home from a slab leak is important to act quickly.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


It’s fairly easy to find the location of a slab leak from the hot water line. By using the electronic leak detector around a hot spot on the floor will help us pinpoint the location. Locating a cold water-line leak is very challenging. An electronic water leak detection device must be used to ‘listen’ to the length of buried pipe. Our equipment reveals the exact location of the leak in the slab. Non-invasive electronic detection equipment means we don't have to damage your home to find the location of the issue. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


Detecting a slab leak’s exact location requires electronic equipment. Water flow and hole size cause a sound to be emitted with a unique frequency by the leak. The equipment isolates the sound and locks on to the issue location. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. Our operations don't cause damage and are non-invasive.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. As licensed contractors our plumbers at 247 LeakMasters are able to handle the size and scope of any job. We are insurance specialists and work directly with your homeowners insurance company so you don’t have to.



If you think you have a slab leak, do not delay. That will only lead to greater damage and increased costs. We are always ready to help! Our plumbing technicians can be at your Stuart home in 60 minutes any day of the week regardless of what time it is. We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!