phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Murrieta Hot Springs



Think you have a slab leak in your Murrieta Hot Springs home or business? When it comes to Slab leak detection in Murrieta Hot Springs, 247 LeakMasters a local and family owned business is your go to solution. 247 LeakMasters expert plumbers use the very latest in leak detection technology to diagnose the source of a leak so we can fix the problem and repair all of your flood or water damage. With years of experience behind us, we expertly repair your leak with minimal invasion.

All of our plumbers are licensed contractors and experts in repairing home damage. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Murrieta Hot Springs homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Murrieta Hot Springs

What is a slab leak?

Plumbing in most homes in Murrieta Hot Springs utilize copper piping underneath a concrete foundation. It is common for cracks to develop in even the most reliable copper piping over time. This is what we call a slab leak. It is often difficult to find the source of the leak because the pipe is hidden in the slab and water can escape slowly over time. Slab leaks can cause substantial damage. It is important to act quickly to minimize exposure to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Hot water lines associated with slab leaks make them easier to find. Hot spots on the floor let us know where to use our electronic leak detector and zero in on the exact location of the problem. Locating a cold water-line leak is very challenging. Listening to a buried pipe is essential and requires special electronic leak detection equipment. The device will accurately pinpoint the location of the leak within the slab. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. We keep costs of the repair to a minimum by find the exact location.


What is slab leak detection & how does it work?


The source of the leak requires electronic equipment that is made for slab leak detection. Sounds are emitted at varying frequencies from leaks depending on the size of the hole and the flow of the water. Our detector locks on to the sound and pinpoints where the issue is. We avoid digging up the floor to find the issue because the sound travels through the slab. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Many skills are required to successfully find and repair a slab leak; detection, re-piping and water damage restoration. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. 247 LeakMasters has 60 minute response times for Murrieta Hot Springs around the clock. Our plumbing technicians are ready to help! As a family owned, run and operated local business, we have over 20 years experience as the slab leak repair experts! Call today for your peace of mind!