phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Mission Viejo



Do you suspect that your Mission Viejo home has a slab leak? When it comes to Slab leak detection in Mission Viejo, 247 LeakMasters a local and family owned business is your go to solution. Our plumbing technicians use the latest leak detection equipment to find the source and repair the pipe & any water or flood damage. Our expertise allows for us to repair your leak with the minimal amount of damage.

All of our plumbers are licensed contractors and experts in repairing home damage. As industry experts, we have plenty of experience working with directly with your insurance company for piece of mind.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Mission Viejo homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Mission Viejo

What is a slab leak?

Plumbing in most homes in Mission Viejo utilize copper piping underneath a concrete foundation.  Despite the fact that copper is a reliable plumbing material, cracks and holes can develop over time. Since the leak source is under concrete and is not easily detectible, by the time you notice the issue it has caused damage already. This is what is known as a slab leak. If you suspect you have a slab leak, it is important to act quickly and avoid any further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. The exact location is easy to find with our leak detector once we find the hotspot on the floor. It is difficult to pinpoint the exact location of cold water-line leaks. Electronic leak detection equipment is required so we can ‘listen’ to buried pipes. Our equipment reveals the exact location of the leak in the slab. We avoid digging up your floor to find the issue by using the latest electronic leak detection equipment. Time and costs are reduced because we identify exactly where the repairs need to be done.


What is slab leak detection & how does it work?


Slab leak detection uses electronic equipment to locate the source of the leak. The flow of water and size of the hole gives the leak a unique sound at a customized frequency. Our detector locks on to the sound and pinpoints where the issue is. Sounds traveling through the slab helps us isolate the issue and avoid digging up your floor. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


Water damage restoration, repiping, and detection and slab leak repairs take a variety of skills. The technicians at 247 LeakMasters are fully licensed contractors in addition to being plumbers. Homeowners insurance can seem scary. Our friendly staff are experts at dealing directly with your homeowners insurance and will be with you every step of the way.



Delays in diagnosing a slab leak can cause more damage drive up repair costs. We can have a plumbing technician from 247 LeakMasters at your Mission Viejo property in 60 minutes or less, 24 hours a day, 7 days a week. We are a family owned local business that has been providing slab leak repair services for more than 20 years. Call us now!