phone icon855-647-5944

We Bill Insurance!

Family Owned And Operated for over 20 years!

clock with 24 and 7 near the hands

60 Minute Response! phone icon 855-647-5944 Emergency Plumbing Help


Slab Leak Repair Glenview



Slab leaks in Glenview can cause major long term damage to your home. Family operated and local to Glenview, 247 LeakMasters is your number 1 choice for slab leak detection. Using top of the line electronic leak detection equipment, we find the source and fix your leak and pipes, and repair any water or flood damage. With years of experience behind us, we expertly repair your leak with minimal invasion.

We are licensed contractors can perform quality repairs to any damage you have. Working with the insurance company can be a pain! Don’t worry, we will work directly with your insurance company and adjuster.

We do not charge for call outs. Call us today to find out how your detection could be FREE! We can be with you in less than 60 minutes! In addition to fixing your slab leak we provide full service water damage restoration for Glenview homes. If you think you may have a slab leak, don’t delay, call us today!

Slab Leak Repair in Glenview

What is a slab leak?

The plumbing systems in many properties in Glenview were installed with copper piping buried in the large concrete foundation. Copper pipes are know to be susceptible to developing cracks and holes as time goes on. The water coming from under the foundation is referred to as a slab leak. It takes time for the water to become visible since the source generally is not visible. Quick action is of the upmost importance if you think you have a slab leak, this can prevent further damage to your home.



247 Emergency Leak Detection

Get Emergency Plumbing Help!







What does a slab leak look like?


If you can see the pipe, even a small leak is easy to trace. Slab leaks occur in the pipes buried deep in the concrete foundation of your home meaning that is not always visible.


How can I tell if I have a slab leak?

Although it may not be possible to see the slab leak you can use the following techniques to diagnose an unseen leak:

  1. Unusually High Water Bills – even the smallest hole in a water pipe can lose thousands of gallons per month. Check your water bill increased usage you cannot explain.
  2. Sound of Running Water – if you can hear water moving quickly through the pipes when faucets & appliances are off, you may have an issue.
  3. Moving Water Meter – If all appliances and faucets in the house are turned off and the meter is stil moving, you could have a problem.
  4. Standing Water or Saturated Ground - If a leak is left undetected for a long time, water can create a damp patch on the floor
Slab Leak Repair


What causes a slab leak?


While copper pipe is regarded as a reliable and long-lasting plumbing material, it can still fail. Some of the most common causes include:

Slab Leak Broken Copper Pipe
  1. Age - as a pipe gets older leaks become more likely. Our experience shows that homes over 25 years old are more likely to suffer a slab leak, but homes of any age can be affected.
  2. Incorrect Installation – if the pipe was bent or damaged when installed, problems can occur in later years.
  3. Temperature Changes - as the slab increases & decreases the pipes expand and contract. Vibration or or edges rubbing against the pipe can create holes.

Whatever the reason for the slab leak, it is important that the problem is found and repaired by a qualified plumber. This will prevent further, more expensive issues.


How can I find a slab leak?


Generally it is pretty easy to use the hot water line to find the general area of a slab leak. A hot spot on the floor will give the approximate location, allowing for us to quickly find the accurate location using a leak detector. It is difficult to pinpoint the exact location of cold water-line leaks. Electronic leak detection equipment is required so we can ‘listen’ to buried pipes. We use specialized devices that show us with pinpoint accuracy where the slab leak is located. Modern electronic leak detection equipment means you do not have to dig into the floor to find the problem. Pinpoint accuracy helps us reduce time and costs for your repair.


What is slab leak detection & how does it work?


It is important to use electronic equipment to locate the exact source of your slab leak. Leaks emit sound at different frequencies depending on the flow of the water and size of the hole. The problem is located when the detector picks up the sound. We don't dig up your floor to search for the problem because we can detect the sound coming through the slab. Non-invasive and non-destructive techniques are always used.


How do I repair a slab leak?


Once you know you have a slab leak, you have choices for repair. If the pipes are easily accessible we can make a direct repair, but this is rarely the case with slab leaks. We do not usually recommend digging up the floor to repair the leak as this can move the pipe and cause more problems in the future. Instead, a new pipe can be routed through the framework of the house isolating the area with leak.


Slab Leak Repair Service


The skills required for slab leak repair; detection, re-piping and water damage restoration are vast. 247 LeakMasters are licensed plumbers and contractors, able to handle the complete job. Don’t worry about dealing with your insurance company. We will help you every step of the way.



The more time that goes by before identifying a slab leak generally correlates to increased damage and repair fees. We truly are 24/7. We have 60 minutes response times for Glenview plumbing emergencies. We are ready to help! For more than 20 years we have provided local family owned service for slab leak repairs. Call now 60 minute service!